www.gaswelldewatering.com
Lift-Tech makes sure oil and gas wells produce optimally with improved efficiency and reliability at an economical cost.
Do you need increased production?
Are your oil or gas production levels lower than they should be because of:
- A Deviated Hole?
- High Solids (sand) content?
- Liquid Loading?
Problems like these can be costly when downtime means lost production!
It’s time for a more effective artificial lift solution.
A hydraulic jet pump works effectively in a variety of down hole situations ranging from working in a deviated or crooked hole, to moving high solids and sand content. With NO MOVING PARTS DOWNHOLE, the Jet Pump System is the most attractive solution to operators working in unique situations where dependable, efficient and cost effective artificial lift is required.
What is Gas Well Dewatering?
"Gas Well Dewatering," or "Gas Well Deliquification",is the general term for technologies used to remove water build-up from producing gas wells.
When natural gas flows to the surface in a producing gas well, the gas carries liquids to the surface if the velocity of the gas is high enough. A high gas velocity results in a mist flow pattern in which liquids are finely dispersed in the gas.
Consequently, a low volume of liquids is present in the tubing or production conduit, resulting in a pressure drop caused by gravity acting on the flowing fluids. As the gas velocity in the production tubing drops with time, the velocity of the liquids carried by the gas declines even faster. Flow patterns of liquids on the walls of the conduit cause liquid to accumulate in the bottom of the well, which can either slow or stop gas production altogether.
The Solution.
The Solution to this problem can be achieved by installing a Hydraulic Jet Pump. A surface pump injects power fluid down the tubing into the Jet Pump. By utilizing the Venturi effect, formation fluid is drawn into the pump, comingles with the power fluid, and returns to the surface.
The same concept is also applicable to Oil Wells. In this case, the reservoir pressure drops to such a low level that it cannot lift the weight of the oil/water column to the surface through large-diameter tubing. By installing a Hydraulic Jet Pump, large amounts of fluid can produced with relatively reservoir pressures.
The greatest advantage of using a Hydraulic Jet Pump is its ability to work with NO MOVING PARTS DOWNHOLE.
